Categories
Risk Management

Your facility is going through some upgrades, including the construction of a ne

Your facility is going through some upgrades, including the construction of a new office and training center, and Acme General Contractors, Inc. is the general contractor who’s been contracted to perform this work. The local OSHA Area Office visited the construction site and found several violations of which the contractor is responsible.
Under the multi-employer policy, your company, as the “controlling”, or “host” company, received an OSHA citation for not having an emergency action plan (EAP) in place that included contracting firms. You have been hired as the company safety officer to develop and implement the program required by OSHA that includes all contractors on site, and in particular, the new construction project.
The new office/training facility is two (2) stories tall. The ongoing construction activities are concrete masonry units (CMU) block exterior walls and a standing seam metal roof on the exterior, along with underground utility installation requiring excavations. The masons are working from scaffolding, and the roofers are tied off to anchor points. They access the roof area using aerial lifts or the exterior stair tower on the south end.
In the interior of the building, framing and drywall is being installed, the electricians are working to install permanent power, the plumbers and HVAC trades are working from ladders to install their work. Lighting is temporary string lights. The elevator has not been installed yet, however there is an exterior material lift that also carries the workers to their respective floors where they are working. On the upper floor, the stairs have not been installed yet, and access is gained by using a ladder in a floor opening that will eventually be covered.
Prepare a written EAP containing all the information required by 29 C.F.R. 1926.34 and 1926.35. Your plan must address how you will specifically address the requirement for medical services and first aid, means of egress and how to notify workers of an emergency and employee training. Additionally, include a section that addresses how you will reduce the risk of and respond to acts of violence at the worksite.
Your plan must be at least three pages in length, not counting your title page and reference page. You must include at least two academic references. Adhere to APA Style when creating citations and references for this assignment. APA formatting, however, is not necessary.
Link to 1926.34 https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.34
Link to 1926.35 https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.35

Categories
Risk Management

Please increase the text within the introduction, background and statement of th

Please increase the text within the introduction, background and statement of the problem. Please use more references. write more about the impact of changing hospital facility in terms of utility and hospital layout. and this in addition for what you wrote.
as you see the table of content, try to search and provide 50 sources that can be used in upcoming project such as Chapter 2, 3, 4… etc.
I will attach all document you may need.

Categories
Risk Management

As the new Occupational Safety and Health (OSH) manager for the CSU Widget Facto

As the new Occupational Safety and Health (OSH) manager for the CSU Widget Factory, you recently completed a study of the injuries entered on the Occupational Safety and Health Administration (OSHA) 300 form over the past 12 months. Your findings revealed the following:
Eight employees were treated for various levels of heat strain during the summer months. Six were working indoors in the warehouse, and two were working outdoors doing grounds maintenance. All were first aid injuries.
There were six forklift accidents that resulted in injuries:
Three dropped loads struck nearby workers. All received first aid.
One forklift flipped over going around a corner, ejecting the operator. The operator lost 10 days of work and was on restricted duty for 30 days.
Two employees working in the warehouse aisles were struck by forklifts. Both were medical treatment injuries.
Five electrical shocks were reported in the machine shop. All occurred during routine equipment maintenance. All were medical treatment injuries, but none resulted in days away from work.
There were nine eye injuries in the machine shop. Five were foreign particles in the eye and four were machine oil splashes. All were reported as first aid injuries.
Six employees in the plating shop were treated for inhalation of solvent vapors. Two resulted in lost workdays, and the others were medical treatment injuries.
To reduce workplace injuries, select three program areas from the analysis above that should receive immediate attention. Select three OSH programs from the following:
Heat Stress, Powered Industrial Vehicles, Material Handling and Storage, Hazardous Energy Control (Lockout / Tagout), Personal Protect Equipment (PPE), Respiratory Protection Program
Discuss why the specific OSH program area was selected.
Explain how you would identify and assess the hazards related to this program area.
Discuss some possible hazard control measures that could be used to reduce risk.
Identify training requirements for the program area.
Propose methods for ensuring employees comply with safety procedures.
Your submission must be in APA format, and a minimum of three pages in length, not including title and reference pages. At least two reference sources must be used to support your discussion. One of the references can be the course textbook. Additional references should be articles from professional journals, recognized safety organizations, or other OSH textbooks.

Categories
Risk Management

As the new Occupational Safety and Health (OSH) manager for the CSU Widget Facto

As the new Occupational Safety and Health (OSH) manager for the CSU Widget Factory, you recently completed a study of the injuries entered on the Occupational Safety and Health Administration (OSHA) 300 form over the past 12 months. Your findings revealed the following:
Eight employees were treated for various levels of heat strain during the summer months. Six were working indoors in the warehouse, and two were working outdoors doing grounds maintenance. All were first aid injuries.
There were six forklift accidents that resulted in injuries:
Three dropped loads struck nearby workers. All received first aid.
One forklift flipped over going around a corner, ejecting the operator. The operator lost 10 days of work and was on restricted duty for 30 days.
Two employees working in the warehouse aisles were struck by forklifts. Both were medical treatment injuries.
Five electrical shocks were reported in the machine shop. All occurred during routine equipment maintenance. All were medical treatment injuries, but none resulted in days away from work.
There were nine eye injuries in the machine shop. Five were foreign particles in the eye and four were machine oil splashes. All were reported as first aid injuries.
Six employees in the plating shop were treated for inhalation of solvent vapors. Two resulted in lost workdays, and the others were medical treatment injuries.
To reduce workplace injuries, select three program areas from the analysis above that should receive immediate attention. Select three OSH programs from the following:
Heat Stress, Powered Industrial Vehicles, Material Handling and Storage, Hazardous Energy Control (Lockout / Tagout), Personal Protect Equipment (PPE), Respiratory Protection Program
Discuss why the specific OSH program area was selected.
Explain how you would identify and assess the hazards related to this program area.
Discuss some possible hazard control measures that could be used to reduce risk.
Identify training requirements for the program area.
Propose methods for ensuring employees comply with safety procedures.
Your submission must be in APA format, and a minimum of three pages in length, not including title and reference pages. At least two reference sources must be used to support your discussion. One of the references can be the course textbook. Additional references should be articles from professional journals, recognized safety organizations, or other OSH textbooks.

Categories
Risk Management

he slide set should cover the following topics (with no more than 1 slide per to

he slide set should cover the following topics (with no more than 1 slide per topic and have an introductory slide as well.
Topic 1) WHS legislation in Queensland
Topic 2) Your agencies commitment to ethical standards, with at least 3 examples of how you are achieving this
Topic 3) The Agency organisation and how safety responsibilities are represented in it (a staff organisation plan is required for this topic)
Topic 4) Three examples of risk that are perceived and what control measures are to be implemented
Topic 5) How staff are going to be involved and how staff feedback is going to be achieved
The presentation should take no more than 10 minutes.
You can provide video recording or podcast for this assessment.

Categories
Risk Management

The idea and what market industry research: this idea gives the opportunity for military members on a base to make a little money by delivering groceries from the commissary or the bx to other members on base who might not have the time to go grocery shopping due to the fact that they could have a family at home or a busy life in general.

The opportunity
The Idea and what market industry research: This idea gives the opportunity for military members on a base to make a little money by delivering groceries from the commissary or the BX to other members on base who might not have the time to go grocery shopping due to the fact that they could have a family at home or a busy life in general. Curbside pickup can also be implemented into the commissary and BX to allow for easier shopping for military members. Most mainstream grocery stores have this option (Walmart/Target), whether it be curbside pick up or deliverable groceries. This would just expand on that idea to military members on a military base.
Sources:
● https://www.grandviewresearch.com/industry-analysis/online-grocery-market (Link to online grocery delivery growth! We obviously do not have our own company and business yet, but we can use this link and cite to see how we can dominant the market and see what people and what online delivery grocery is going in the near future)
● Textbook (Attached) as well and control F to find the specific definitions to cite what the textbook wants an entrepreneur to think about to gain or develop competitive advantage and how to make our idea better than others.
https://drive.google.com/file/d/1D3Ewo6iQ1o40a4fxyTrO2bFm-E8J7I9-/view?usp=sharing
My part (one page)
We are using Pull factors guidelines because we have an identified market gap, this is the question that applies to the question I am answering on the project, I must state the question I am answering and also answer any competitive greats how to combat the threats and how will our idea stand out better?: Evaluate the competitive threats and how you might combat these threats (if someone is already offering a similar product/service, how will your offering be different/better? If no one has an offering like yours, which companies might become competitors once you prove successful?)
Requirements
DEFINITIONS: A Push-Based opportunity is one where a new technology/design is identified and is pushed to a market. A Pull-Based opportunity is one where a market opportunity, problem, or gap is identified, and then a solution is developed.
OBJECTIVE: This is your first formal written attempt at systematically communicating your opportunity. I am doing a Pull-Based opportunity Be sure to address the following issues:
Evaluate the competitive threats and how you might combat these threats (if someone is already offering a similar product/service, how will your offering be different/better? If no one has an offering like yours, which companies might become competitors once you prove successful?)
My part of the grade:
New Idea Descriiption: 1 2 3 4 5 (Is this a unique idea? Can it be developed into a competitive advantage?)

Categories
Risk Management

Attached you have the xl file where you have complete the work and also the word

attached you have the XL file where you have complete the work and also the word file with all the instructions…I also attached a power point slides in case you need help …

Categories
Risk Management

Options for solutions, and

An executive summary should follow this general format:
problem statement
background on the issue
options for solutions, and
your recommendation based on the research.
Base your executive summary on factually accurate analysis.
Include at least five different in-text citations in APA format from scholarly sources.
Include a references page in APA format.
Use 1-inch margins, 12 point font, and double spacing.
The body of your executive summary should be no shorter than two pages and no longer than four pages.
NOTE: Executives have limited time (and patience). You will be graded, in part, on your ability to provide a concise summary that is wholly factual, appeals to reason and provides a sensible solution recommendation.

Categories
Risk Management

Last, but not least, you should communicate the results of the risk management process and the conclusions you can draw from it.’

I have the following assignment:
‘In this assignment, you should read Hopkin, P. Fundamentals of Risk Management: Understanding, Evaluating and Implementing Effective Risk Management. London: Kogan Page. (2017 or later), and write a paper in which you describe an application problem of your own choice, but of a reasonable size, and document the application of a thorough risk management process to the chosen problem (1350-2250 words). You are expected to describe the application problem in sufficient detail for students and examiners to understand it. When documenting the risk management process, pay special attention to the whats, the hows and the whys, i.e., what you did, how you did it and the reason for doing it. Last, but not least, you should communicate the results of the risk management process and the conclusions you can draw from it.’
I would like the analyzed application problem to be related to the pharma industry.
Also, there are already some sample works from other students, so I would like mine to be similar.
I am attaching 3 sample works and also the mentioned book.

Categories
Risk Management

The report should include the following: – • A clear descriiption of the work

The report should include the following: –

• A clear descriiption of the work place or workplace activities to be assessed
• An explanation of the principles of risk assessment and the reasons for carrying out the risk assessments
• An explanation for the risk assessment and how these relate to the particular workplace or activity
I need to fill the risk assessment table with the hazards that you can find it from the picture. Then I need a report 500 words that must explain the 3 point that I attached. Aslo I need from you to focus on the control hazard when you writing the report.
I will send you the pictures.
I need you to put the pictures in the report